THE PAINTINGS ARE STURDY.
The frames are made of 15x45mm oak strips glued toghether with 34x34 mm pine strips. The back is either 6mm MDF board or pine veneer.
The paintings are made with an approximate 5 mm thick layer af filler, the ordinary construction type, used for smoothing walls etc.
The colour or the material will not change in foreseeable time. If the surface is damaged it will easily be repaired by sanding off the damaged part.
Below you can see the whole process.
The oak strip are glued together with the pine.
The pieces are cut in 45° angles and glued together.
The back piece of either MDF board or pine veneer is attached. There is room for a 5 mm thick filler layer.
The filler is ordinary contruction filler. The darker parts are with coarse filler, the lighter with fine.
The motif in either gray or white filler is laid out first.
The rest is filled out.
Because the thickness of the layer it cracks up when it dries.
The cracks are filled with corresponding filler.
After sanding, the work is finished!